Required Info for quoting a Downstream Extrusion Puller
Novatec, Inc. is the largest U.S.-based manufacturer of resin dryers for the plastics industry. Novatec is a family of plastics material handling equipment that consists of Plastics Drying, Plastics Conveying, and Plastics Blending with Downstream Extrusion Products to design and install complete Central Plastics Drying and Conveying Systems.
We need this information to complete a quote for your Downstream Extrusion Puller. Below explain why we need each piece of information and why it is helpful.
Material Type
- We need to know the material we are dealing with; this can affect tension, belt design, and belt material, etc.
Approx. Material Temp at Puller (F)
- We need to know the process temp along with the material type that we are dealing with; this can affect tension, belt design, and belt material, etc.
Throughput Rate (fpm, feet per minute)
- This helps us understand the rate at which you need to produce material and if the equipment is sized correctly for your line.
Pipe or Profile
- This helps us understand how the puller will be expected to run, the belt design, etc..
Pipe – ID/OD
- This helps us understand how to size the puller, how it will be expected to run, and belt design, etc..
- We need both dimensions to show the wall thickness
Profile – Dimensions
- This helps us understand how to size the puller, how it will be expected to run, and belt design, etc..
Picture of feedstock
- It is always helpful for us to see an image of what our equipment needs to be capable of running.
What will the unit be connected to?
- We need to understand your system/line operations requirements so we can properly advise on setup/installation.
