Established July 2012 | Celebrating 10+ Years of Service

Novatec Downstream Extrusion Servo Saw NS-6

Required Info for quoting a Traveling Saw

Novatec, Inc. is the largest U.S. based manufacturer of resin dryers for the plastics industry. Novatec is a family of plastics material handling equipment which consists of Plastics Drying, Plastics Conveying and Plastics Blending with Downstream Extrusion Products to design and install complete Central Plastics Drying and Conveying Systems.

Table of Contents

Required Info for quoting a Traveling Saw

Novatec, Inc. is the largest U.S.-based manufacturer of resin dryers for the plastics industry. Novatec is a family of plastics material handling equipment that consists of Plastics Drying, Plastics Conveying, and Plastics Blending with Downstream Extrusion Products to design and install complete Central Plastics Drying and Conveying Systems.

Novatec Downstream Extrusion Servo Saw NS-6

We will need this information to complete a quote for your traveling saw. Below we’ve explained why we need each piece of information and why it is helpful.

Material Type

  • We need to know the material we are dealing with; this can affect timing, blade design, and blade configuration, etc.

Approx. Material Temp at Saw (F)

  • We need to know the process temp along with the material type that we are dealing with; this can affect setup, timing and blade material, etc.

Throughput Rate (fpm, feet per minute)

  • This helps us understand the rate at which you need to produce material and if the equipment is sized correctly for your line.
  • Note Novatec Traveling Saws are Full Servo for greater efficiency and accuracy.

Pipe or Profile

  • This helps us understand how the saw will be expected to run, the blade design, etc..

Pipe – ID/OD

  • This helps us understand how to size the saw, how it will be expected to run, and blade design, etc..
  • We need both dimensions to show the wall thickness

Profile – Dimensions

  • This helps us understand how to size the saw, how it will be expected to run, and blade design, etc..

Picture of feedstock

  • It is always helpful for us to see an image of what our equipment needs to be capable of running.

What will the unit be connected to?

  • We need to understand your system/line operations requirements so we can properly advise on setup/installation

Visit our Youtube Channel for equipment videos

share

Related Posts

Together We Can Make Your Production Systems Shine

Are You Ready To Improve Production and Make More Money?

Why Processors Love To Work With Five Nines

Steven helped us implement a full cell from the FCS molding machine, Yushin picker, and TempTek chiller. Everything worked great and he was on top of everything, we felt supported. Thank you

Brad Kapper

Processing Engineer, SeaSucker

We were having trouble with our current IMM supplier. It was a relief to have Steven from Five Nines showing up and supporting us. We decided to switch to TOYO as a result. Thanks for the support.

Milton Murphy

Molding Supervisor, Molex

“Steven and I attended Master Molder I class together and have been working together since. I really appreciate all of the time and effort the team at Five Nines puts into providing their services.”

Andres Mora

Processing Engineer, Microtech

“We purchased our first two injection mold machines from TOYO and Five Nines. Their industry expertise has helped us continue to improve our production. They are competitive pricing and outstanding customer service is why we will be purchasing more machines from Five Nines in the future.”

John Donohue

Processing Engineer, Genicon

“I have dealt with many reps as I’ve built my company and Five Nines delivers consistent and honest sales support and service. We look forward to implementing our new Fast Tie Ejector system from Smartflow.”

Adam Rimer

Owner, Rimer and Rimer

We’ve had used TOYO’s for years. Then we started buying new from TOYO and Five Nines, we have since purchased more and appreciate their service and quality.

Patrick McCarthy

Plant Manager, DENTSPLY

We recently purchased multiple chillers from Advantage and Five Nines. They were very competitive and we are happy with the equipment.

Mike Heinz

Molding Manager, Arthrex

We’ve purchased many robots and a couple automation cells from Yushin and Five Nines, they’re quality and support has kept us competitive.

Joe Lane

Molding Manager, Cardinal Health