Five Nines Plastics Division Main Logo
EQUIPMENT LINE CARD

Established July 2012 | Celebrating 10+ Years of Service

Learn More

And get better at implementing the right equipment

Recent Posts

AllAutomationBlendingDryingExtrusionInjection MoldingMaterial HandlingProcess CoolingRecyclingTraining
Math for Molders Master Molder Injection Molding Process Training
Injection Molding

Master Molder I – Make more parts and Money

2 weeks, 10 days, 64 hours of class, 17 hours of study, and 10 hours of practical and written exams. Master Molder I is a 2 week course..

Read More
Slide Products Mold Metal Wipes Tub
Injection Molding

Slide Products Mold Metal Wipes

As a larger manufacturing company, if you are shutting down production for a temporary period of time you are losing production and income. Slide Mold & Metal wipes are used instead so that machinery can be easily cleaned in the most efficient way possible..

Read More
Tracer vm flowmeter direct with AutoReg white
Process Cooling

Tracer VM Flowmeter from Smartflow

The Tracer®VM Base Flowmeter is a non-display sensor that provides a 0.5 to 3.5 Volt output for process flow rate and a 0.5 to 4.1 Volt output for process temperature..

Read More
Slide ultra purge thermoplastics purge slide
Injection Molding

What is Purging Compound – An Overview

A purging compound is a special type of product formulated for cleaning extruders and thermoplastic molding machines. Base resin and several more additives are added in this formulation to clean dies, barrel

Read More
Dryers Plastics Process Regen Energy Savings
Drying

How to Reduce Process Heat Loss

Approximately 35% of the total power used is employed in regeneration. To ensure that you are working towards your goal of energy saving you must keep the power usage at the desiccant to the minimum. In the process of regeneration, the

Read More
Novatec Dryer Wheel Flaking Desiccant Model
Drying

An Introduction to Resin Drying

The use of non-hygroscopic resins is slowly becoming popular among the processors and there are many molders who prefer using a resin that is free from hydration and has been warmed up to a consistent and even temperature is the best to

Read More
Dryer Plastics Process Heat Savings Diagram
Drying

Understanding Drying Parameters

Heat is considered as the first fundamental drying parameter that can be used with any kind of polymer. Here is how heating affects hygroscopic materials & non-hygroscopic polymers. In the Hygroscopic polymers, the water

Read More
Slide Advantages of Hot Mold Cleaner versus Cold Mold Cleaner
Injection Molding

Advantages of Hot Mold Cleaner versus Cold Mold Cleaner

Depending upon the temperature of the mold, the process and the cleaning solvents change. Different solvents are designed to work best at different temperatures. For example, if you use a mold

Read More

Together We Can Make Your Production Systems Shine

Are You Ready To Improve Production and Make More Money?

Request a Quote

Why Processors Love To Work With Five Nines

Steven helped us implement a full cell with a molding machine, Yushin picker, and TempTek chiller. Everything worked great and he was on top of everything, we felt supported. Thank you

Brad Kapper

Processing Engineer, SeaSucker

We were having trouble with our current IMM supplier. It was a relief to have Steven from Five Nines showing up and supporting us. We decided to switch. Thanks for the support.

Milton Murphy

Molding Supervisor, Molex

“Steven and I attended Master Molder I class together and have been working together since. I really appreciate all of the time and effort the team at Five Nines puts into providing their services.”

Andres Mora

Processing Engineer, Microtech

“I have dealt with many reps as I’ve built my company and Five Nines delivers consistent and honest sales support and service. We look forward to implementing our new Fast Tie Ejector system from Smartflow.”

Adam Rimer

Owner, Rimer and Rimer

We recently purchased multiple chillers from Advantage and Five Nines. They were very competitive and we are happy with the equipment.

Mike Heinz

Molding Manager, Arthrex

We’ve purchased many robots and a couple automation cells from Yushin and Five Nines, they’re quality and support has kept us competitive.

Joe Lane

Molding Manager, Cardinal Health

Request a Quote

Select “Equipment Type” in the Dropdown Below

Five Nines Plastics Division White Logo
260 1st Ave S, Suite 200
St Petersburg, FL, 33701
Linkedin Youtube Facebook Instagram Twitter

Processing Equipment

AUXILIARY EQUIPMENT

TRAINING

Copyright 2012 – 2022 © 5 Nines Automation, LLC – dba, Five Nines – Plastics Division