Only $350/seat

Meet your Instructor

I have worked for almost 30 years as a “molder”. I worked my way up through the ranks to a Senior Plastics Process Engineer. In doing so, I’ve performed almost every job in molding including: Set Up Adjuster, Group Leader, Manufacturing Supervisor (for a 79 machine operation), Senior Mold/Process Engineer and Mold Engineering Supervisor. I also quoted work including medical jobs that I would work with our teams to design, build and run. I led manufacturing in the validation for production on the floor and worked with the customers for their approval.

Later I spent 8 years within an Automotive plant (consisting of over 100 injection molding machines) leading process engineering and later teaching Master Molder classes. I started out teaching basic and advanced injection molding for 15 years at the Community College level. However, in recent years I’ve been an RJG instructor for the largest connector manufacturer in the world. I have instructed classes from Molding Essentials through Master Molder II.

Brad

Brad Faulkner
Technical Sales Manager

Brad

Brad Faulkner
Technical Sales Manager

Meet your Instructor

I have worked for almost 30 years as a “molder”. I worked my way up through the ranks to a Senior Plastics Process Engineer. In doing so, I’ve performed almost every job in molding including: Set Up Adjuster, Group Leader, Manufacturing Supervisor (for a 79 machine operation), Senior Mold/Process Engineer and Mold Engineering Supervisor. I also quoted work including medical jobs that I would work with our teams to design, build and run. I led manufacturing in the validation for production on the floor and worked with the customers for their approval.

Later I spent 8 years within an Automotive plant (consisting of over 100 injection molding machines) leading process engineering and later teaching Master Molder classes. I started out teaching basic and advanced injection molding for 15 years at the Community College level. However, in recent years I’ve been an RJG instructor for the largest connector manufacturer in the world. I have instructed classes from Molding Essentials through Master Molder II.

See Brad in action

Maruka USA (TOYO & FCS)

1210 NE Douglas St, Lee’s Summit, MO 64086
 marukausa.com

Sales Regional Manager:
Kevin Bruce
 (973) 487-3800
 (973) 244-2147
 [email protected]

Service:
Heather Mallet
 (816) 524-1811;463
 [email protected]