This calculator is a quick way for you to review your machine operating costs and where your savings will be realized when implementing an All-Electric machine.
The goal is to make sure that your mold will fit, the screw will work with your material, and your process will operate as good and better than it currently does. We will need this information to complete a quote for your injection molding machine Below we’ve explained why we need each piece of information and why it is helpful.
The goal is to make sure that your mold will fit, the screw will work with your material, and your process will operate as good and better than it currently does. We will need this information to complete a quote for your injection molding machine Below we’ve explained why we need each piece of information and why it is helpful.
The goal is to make sure the robot fits your molding machine, then to make sure we apply the right configuration and programming to satisfy your process. We will need this information to complete a quote for your robot. Below we’ve explained why we need each piece of information and why it is helpful.
The goal is to make sure the robot fits your molding machine, then to make sure we apply the right configuration and programming to satisfy your process. We will need this information to complete a quote for your robot. Below we’ve explained why we need each piece of information and why it is helpful.
Math for Molders Makes you a Better Molder. Many processors are guilty of “winging” it. Well, don’t be one of
Mold Shield has a unique extra-dry spray package that provides a dry, non-penetrating mist into pin holes, slides, cams and other moving parts of the mold. This particular dry mist prevents the marking of plastic parts when molds
A liquid purge does not require time to soak, either. Instead, the liquid purge works with the carrier resin to scrub the screw and barrel, removing color and the current resin and readying components for the next color or resin to be introduced.
The solvent used by PPE is named Tetrachloroethylene (aka Perchlorethylene). The density of this material is 1.623, which means that for every fluid ounce of liquid product, it will weigh 1.623 net weight ounces. So a 16 net weight ounce can
Most production houses prefer a “dry” rust preventative as it does not penetrate into ejector pins slides, cams, and other moving mold parts and allows a faster & cleaner startup at the time of putting the mold
Copyright 2012 – 2024 © 5 Nines Automation, LLC – dba, Five Nines – Plastics Division
Sales Engineer, servicing Florida since July 2012. Send me your request and ill get back with you within 24 hours.
Send me your request and ill get back with you within 24 hours.
